- Coatings Supplies
- Construction Supplies
- Industrial Equipment
- Landscaping Supplies
- Safety Supplies
- Water Management
- Waterproofing Supplies
HyGrout E200 - Hychem International
2 component, 100% solids, high performance epoxy grout (that can have aggregates added) designed for use in situations where high early mechanical strength development is required.
IIS-PF9-HP/EG - Hychem International
High strength, high temperature, high flow, solvent free epoxy grout for depths to 150mm.
Ardex WPM 750 - Ardex
A fleece-lined heat weldable waterproofing sheet membrane specially designed for the direct adhesion of tiles and screeds within internal wet areas
Ardex STB STA Tape - Ardex
A high performing self adhesive butyl tape designed to create a waterproof seal for drains, penetrations, junctions, and joints prior to ARDEX applied membrane solutions.
Ardex WA 98 - Ardex
A high performance membrane contact adhesive. It has been specially developed for ARDEX sheet applied membranes and adheres to a variety of substrates.
A fleece-lined weldable waterproofing sheet membrane specially designed for the direct adhesion of tiles and screeds within internal wet areas.
Ardex WPM 1000 - Ardex
A polypropylene-lined heat weldable waterproofing sheet membrane specially formulated for the direct adhesion of tiled systems or for other non-exposed use.
Ardex WPM 300 - Ardex
Waterbased Epoxy Membrane
Fatafol 803 - Fatra Australia
An unreinforced membrane on a base of plasticized polyvinylchloride (PVCP), type T according to the Standard EN 13967 for waterproofing of ground and underground buildings to aggressive pressure and sucking water and as a waterproofing layer of waterproofing systems to leakage of liquids and leaches into the ground waters.
Fatrafol 810v - Fatra Australia
A roofing membrane on the basis of PVC-P reinforced with a polyester grid. It is resistant to UV- radiation and can be exposed to the direct weathering influences.
Fatrafol 807v - Fatra Australia
A PVP-P based waterproof roofing membrane with underlay of a non-woven PES-textile (mass per unit area – 120g/m2). It is resistant to UV radiation and can be exposed to the direct weathering influences.
Fatrabond Adhesive – 9356 - Fatra Australia
A fast curing formula with an excellent high coverage rate. Fatrabond contact adhesives 50% of the final strength immediately, with full strength achieved in 24 hours. It has a good moisture and weather resistance against high temperature exposure.