Epoxy Repair
Epoxy repair products utilise 2 part cross linking formulations to provide superior bonding and durability.

Ardex
ARDEX Concrete Injection Application Guide
Application guide for ARDEX T-Port System in conjuction with injection epoxies ARDEX RA 142, RA 144 and RA 146.
Ardex RA 144
Low Viscosity Structural Concrete Crack Injection Epoxy
Ardex RA 142
Super Low Viscosity Structural Concrete Crack Injection Epoxy
Ardex RA 146
Structural crack repair of medium to large cracks
Pressure injected blind-side crack repairs such as basement or foundation walls or parking garages
Pressure injection for cracks from 6mm to 10mm
100% solids, solvent free system with low VOC content.
Ardex RA 56
Cures stronger than concrete
Ultra Low Viscosity – Offers deep penetration into cracks
Rapid cure – Trafficable in less than 20 minutes
Ideal for spall repair when mixed with aggregate
Ardex RA 84
Ultra-fast cure time – Full cure in 30 minutes
Versatile – Anchoring and dowelling adhesive and capping gel for ARDEX Crack Injection Systems
Moisture Insensitive – Allowing for installation and curing on damp substrates
Ardex RA 88
Non-sag – Perfect for overhead and vertical repairs
High strength – Stronger than concrete > 55Mpa
Trowelable and cures underwater

Parchem Construction Supplies
Conbextra EP65 Plus
Ultra high strength, high flow epoxy grout for gap thicknesses of 10mm – 100mm.
Conbextra EP120
A high performance two part epoxy grout for dynamic/repetitive load applications suitable for large volume pours.
Conbextra EP935
A free flowing, water displacing epoxy grout for underwater grouting applications.
Conbextra EP10
A highly fluid epoxy grout for dynamic/repetitive load applications gap width between 0.25-10mm.
Nitomortar EL HB
Hand-applied, trowel finished, high build, chemical and abrasion resistant epoxy repair mortar system.
Nitomortar AP
Multi purpose, epoxy adhesive repair paste.
Nitomortar 908
General purpose, high strength, epoxy patch repair mortar.
Nitomortar 903
Solvent free, general purpose, epoxy binder system.
Nitofill LV
Low viscosity, dual cartridge, epoxy crack-injection system.
Nitobond EP
Epoxy resin primer, high strength bonding agent.

Hychem International
Hychem E50LV
A 2 component low viscosity epoxy injection resin, designed principally for the bonding, sealing and structural repair of cracked concrete, tanks, facings and supports
Hychem PF3
An epoxy adhesive with high flexural strength suitable for bonding, grouting and patching most rigid and semi rigid building materials.
HyGrout E200
2 component, 100% solids, high performance epoxy grout (that can have aggregates added) designed for use in situations where high early mechanical strength development is required.
