Skip to main content

Speak with an expert (02) 4271 3888 or Email now

ARDEX Concrete Injection Application Guide

Application guide for ARDEX T-Port System in conjuction with injection epoxies ARDEX RA 142, RA 144 and RA 146.

DESCRIPTION

The ARDEX Crack Injection Systems use convenient flexible rubber bladders, ARDEX T-Ports, which act as resin reservoirs to allow continuous filling of cracks without constant ‘gunning’ of the epoxy.

INSTRUCTIONS

Always be sure the bonding surfaces are prepared in advance before starting a new cartridge or mixing product. If possible, schedule dispensing to consume an entire cartridge at one time with no interruption of the flow.

SURFACE PREPARATION

Old concrete must be clean, completely dry with no presence of moisture and profiled or textured. New concrete must be a minimum of 28 days old. Before using ARDEX Injection Epoxies, make sure that the surfaces to be bonded are sound and clean so there is no dust, dirt, grease, wax, oil, or any other contaminant present. Smooth surfaces should be mechanically roughened with a wire brush or sand paper before application.

Product specification sheet

product sheet pdfARDEX Concrete Injection Application Guide product specification sheet opens in a new window

Manufacturer

Ardex

Ardex logo
ARDEX develops, manufactures and markets high-quality specialist construction materials including those for the floor levelling and repair industries.
  • Australasian Corrosion Association
  • Association for Materials Protection and Performance
  • Illawarra Innovative Industry Network
  • NACE International
  • The Society of Protective Coatings