Conbextra EP10

A highly fluid epoxy grout for dynamic/repetitive load applications gap width between 0.25-10mm.

Uses

Conbextra EP10 is a low viscocity epoxy grout for situations
where heavy dynamic or mobile loads are encountered. It is
ideal for grouting in small gaps between a base plate and
substrate which needs filling and the structural load be uniformly
distributed. Typical applications are reciprocating machinery,
testing equipment, heavy crane and transporter rails, high speed
turbines, centrifuges and drop forges.

Also for use in conditions where chemical spillage may be
encountered. Typical situations could be met in steelworks,
refineries, electroplating works and chemical plants.

Due to the low viscosity of Conbextra EP10 it can be used to
fill hairline cracks in concrete slabs from 0.25mm and larger on
horizontal surfaces using a gravity-fed method. Using suitable
equipment, Conbextra EP10 can also be used to pressure inject
cracks down to 0.10mm.

Advantages

• High compressive, tensile and flexural strengths
• Resistant to repetitive dynamic loads
• Fast, convenient installation with early strength gain
• Withstands a wide range of chemicals
• Non-shrink and hence ensures complete surface contact
  and bond
• Low creep characteristics under sustained loading

Description

Conbextra EP10 is a two-component low-viscosity epoxy system
for grouting gaps up to 10mm and crack injection.

Product specification sheet

Manufacturer

Parchem Construction Supplies

Parchem Construction Supplies Pty Ltd is part of the Alesco Group and operates within the ‘Construction and Mining Division’. Alesco is a publicly listed industrial brands company who supply a diverse range of specialist industrial products in Australia and New