Cementitious Repair

General purpose, economical, patch repair mortar.

High performance, light-weight, very low shrinkage, patch repair mortar.

Extremely fast setting, reinstatement mortar, trafficable within 1-2 hours (>25 mm thickness).

High performance, free flowing, low alkali, micro-concrete reinstatement mortar.

Fairing mortar screed, to cover surface imperfections, polymer modified (0 mm to 3 mm thickness).

High build, high strength, very low shrinkage, patch repair mortar, compatible with concrete >45 MPa.

High strength gain, low shrinkage mortar for the installation of elastomeric bridge bearings.

Zinc-rich epoxy resin primer to protect steel reinforcement within repair mortars.

Polymer emulsion curing agent.

Polymer emulsion bonding agent.

A two component rapid set liquid epoxy binder for use in civil engineering applications where early development of high strength is essential.

Two component epoxy compositions for bonding ceramic and plastic reflective markers to bituminous and concrete surfaces.

Specially modified Portland cement, fine aggregate gradations, 30 mm long steel fibers and admixtures combined in controlled proportions formulated for the repair and rehabilitation of horizontal concrete surfaces that exceed 25 mm thickness and where high impact resistance is required.

Specially modified Portland cement, aggregates, polypropylene fibers, and admixtures combined in controlled proportions.specifically formulated for the repair and rehabilitation of horizontal concrete surfaces for patches up to 25 mm thick where rapid setting and strength gain are required.

Specially modified Portland cement, aggregates, admixtures and bonding agents combined in controlled proportions for the patching or resurfacing of deteriorated concrete up to 12 mm thick.