Renderoc FC
Fairing mortar screed, to cover surface imperfections, polymer modified (0 mm to 3 mm thickness).
Uses
Renderoc FC cementitious fairing coat is designed
for application in thin layers to produce a fair-faced
appearance to concrete surfaces or masonry surfaces
in readiness to receive a protective/decorative coating.
Surface imperfections up to 3 mm in depth can be filled
with the scrape coat application. Voids of greater depth
should be separately filled as a prior operation, again
limiting the Renderoc FC material thickness to 3 mm.
Renderoc FC can be used independently to infill surface
imperfections and voids or to render large sections of
concrete or masonry at up to 3 mm thickness. It can also be
used in association with other Renderoc mortars. Under
normal conditions, the product does not require an
independent primer or curing membrane.
Advantages
- Excellent bond to the concrete substrate
- Easy to use – no independent primer or curing
membrane necessary - Pre-blended to overcome site-batched variations – only
the site addition of clean water is required - Contains no chloride admixtures
Standards Compliance
Renderoc FC has been approved by the British Board
of Agreement, Certificate No. 98/3461.
Description
Renderoc FC cementitious fairing coat is supplied as a
ready-to-use blend of dry powders, which requires only the
site addition of clean water to produce a highly consistent
cementitious fairing mortar.
The material is based on a blend of cements, graded
aggregates, special fillers and chemical additives to provide
a material with good handling characteristics, while
minimising water demand.
The product exhibits excellent thermal compatibility with concrete and is fully compatible with other Renderoc
mortars and Dekguard coatings.
Product specification sheet
Renderoc FC product specification sheet opens in a new windowManufacturer
Parchem Construction Supplies
