Protective Undercoats are designed to be applied to prepared substrates for two main reasons. Firstly to provide adhesion to the substrate for the mid and / or topcoat. Secondly they provide corrosion protection through the use of anti corrosive additives and through the formation of a barrier between environmental conditions and the substrate they are protecting.
Dulux Protective Coatings
Two pack epoxy zinc rich primer which incorporates a high level of finely divided zinc.
Surface tolerant, high build, high solids epoxy coating.
Two pack epoxy zinc phosphate primer.
Micaceous iron oxide two pack epoxy.
Durebuild STE MIO
Surface tolerant micaceous iron oxide epoxy coating.
Durebuild STE Glass Flake
Surface tolerant glass flake reinforced epoxy coating.
Luxepoxy 4 White Primer
Non inhibitive, two pack epoxy primer.
Two pack self curing inorganic zinc silicate.
General purpose epoxy coating.
Luxaprime Zinc Phosphate
Single pack, high build anticorrosive primer which contains zinc phosphate and micaceous iron oxide pigments.
Duremax GPE Zinc Phosphate
General purpose epoxy zinc phosphate primer.
Epirez 733 Ultra High Build Epoxy Coating
High performance self priming coating for application to steel and concrete.
Solventless high build epoxy based coating that has been tested by the CSIRO Food Research Laboratory for effect on tainting of food.
High solids, high build, epoxy-based coating
Sikagard 706 Thixo
1 part reactive, solvent free silane based impregnation cream with 80% content of active ingredient.
1 component methacrylic resin based protective and decorative coating.
1 part low viscosity, solvent free, reactive impregnation for concrete and cementitious substrates based on silane with 99% active ingredient.
Sikagard 552W Aquaprimer
1 component water dispersed adhesion promoting primer.
2 component high build thixotropic protective coating based on epoxy resin.