Skip to main content

Speak with an expert (02) 4271 3888 or Email now

Vandex Construction Joint Tape

A waterproofing tape for construction joints and cracks:

• economical and safe
• can be applied onto damp substrate
• resistant to hydrostatic pressure
• permanently flexible
• can be bonded to concrete surfaces with VANDEX BB 75 E waterproofing slurry
• simple tape joints bonded with VANDEX BB 75 E

PRODUCT DESCRIPTION

VANDEX CONSTRUCTION JOINT TAPE bridges and seals
construction joints and cracks in concrete structures.
VANDEX CONSTRUCTION JOINT TAPE is approximately
0.7 mm thick. It is a synthetic rubber strip covered on both
sides with an alkali-resistant and flexible polyester fabric
mat, which forms a web on the edges.
The combined properties of the fabric mat and synthetic
rubber ensure a strong bond with the concrete surface,
maintaining excellent elasticity of the tape.

AREAS OF APPLICATION

VANDEX CONSTRUCTION JOINT TAPE, in combination
with VANDEX BB 75 E flexible waterproofing slurry, forms
an excellent and durable seal of construction joints and
cracks, in damp concrete conditions.
Areas of application: construction joints and cracks.
VANDEX CONSTRUCTION JOINT TAPE is resistant to
hydrostatic pressure:

  • on the positive side
  • on the negative side only with appropriate support
    On the negative side movement cracks should be routed out
    first and filled with VANDEX UNI MORTAR 1. Water leaks
    should be waterproofed with VANDEX PLUG first.

APPLICATION INSTRUCTIONS

The damp (not wet) substrate must be sound, open-textured,
clean and free of oil and grease. Irregularities and surface
voids must be made good.

Placement

First step in applying VANDEX BB 75 E

1. Apply a first coat of VANDEX BB 75 E
(3 kg/m², 1.5 mm, mixing instructions as
per Data Sheet VANDEX BB 75 E), at least
1 cm beyond the VANDEX CONSTRUCTION
JOINT TAPE.

Second Step in applying VANDEX BB 75 E

2. Immediately place the VANDEX
CONSTRUCTION JOINT TAPE in the freshly
applied VANDEX BB 75 E coat. Then, embed
both fabric edges in the VANDEX BB 75 E
mix.

Third Step in applying VANDEX BB 75 E

3. Overcoat VANDEX CONSTRUCTION JOINT
TAPE with a second coat of VANDEX BB 75 E
(2 kg/m², 1 mm) and smooth the surface
with damp brush.

Fourth Step in applying VANDEX BB 75 E

4. Finished state: Provide appropriate
protection of the tape if required.

 

Product specification sheet

product sheet pdfVandex Construction Joint Tape product specification sheet opens in a new window

Manufacturer

Vandex

Vandex logo
Vandex is the worldwide registered trademark for a range of professional construction chemical products for waterproofing, protection and repair of concrete and for building protection.
  • Australasian Corrosion Association
  • Association for Materials Protection and Performance
  • Illawarra Innovative Industry Network
  • NACE International
  • The Society of Protective Coatings