Products

Lanotec General Purpose

Corrosion inhibitor, penetrant, lubricant and rejuvenator.

Features

• High resistance to acids and salts.
• Resists wash off.
• Non-conductive to 70kV.
• Food Grade.
• Non-flammable.
• Biodegradable.

Lanolin (a natural product), blended with an evaporative carrier to enable ease of application and penetration.

Using Examples

• Penetrant, frees up rusted parts.
• Protects against corrosion – moisture, salt & acid resistant.
• Rejuvenates and extends the life of vinyl, plastic, rubber, leather, polished fibreglass (non-slippery when wet) and powder-coated surfaces.
• Electrical component protection, including connectors, switchgear, battery terminals, air conditioner components and circuit boards (prevention of insects).
• Lubricant for drilling, cutting, machining & pressing.
• Ideal for bike chains.
• All workshop applications.
• For all weaponry storage.

Storage and Transport

• Aerosols classified as Dangerous Goods for transport and storage (UN 1950; DG 2.1 2YE).
• All other sizes are not classified as DG.
• Keep in a cool, dry, well-ventilated place.
• Keep out of reach of children.
• Shelf life – virtually indefinite if kept sealed in reasonable conditions.

Preparation

• Best applied to dry, clean surfaces.
• General Purpose (GP) can be sprayed on corrosive surfaces to stop further corrosion.
• Remove sources of ignition, voltage and flame until solvent evaporates (approximately one hour).

Application

• Shake the container to ensure the product is mixed correctly. Colder climates will require extra agitation.
• Lanotec General Purpose can be applied via spray, brush or roller.
• Allow approximately one hour before any equipment is subject to water.