Skip to main content

Speak with an expert (02) 4271 3888 or Email now

Chocfast Red Chocfast Red

Three-component, high strength, 100% solids, epoxy grouting compound.

Description

Chockfast® Red is a three-component, high strength, 100% solids, epoxy grouting compound, which is used to grout large machinery and to support soleplates in all types of foundation designs.

Chockfast® Red has extremely high compressive strength and negligible shrinkage, making it ideal for the final positioning of critically aligned machinery within close tolerances.

Chockfast® Red has the following advantages when compared to conventional cement grouts:

  • Impervious to oil
  • Cures at least three times as quickly
  • No mixing ratios to measure
  • Grouts machinery in final aligned position
  • Higher physical strength
  • High impact strength
  • Resistance to many more chemicals
  • Strong bond to metal and concrete
  • Unaffected by weathering and freeze/thaw cycling
  • Stated physical properties assured
  • Superior resistance to fatigue

Chockfast® Red contains no non-reactive diluents which could interfere with the curing mechanism or which could cause material loss during or after cure. Machinery may be positioned at its final elevation before pouring because the shrinkage is negligible. Critical alignments are maintained during machinery operation due to its high dimensional stability and resistance to creep and vibration.

Chockfast® Red may be mixed with a contractor’s hoe and wheelbarrow or in a small portable mortar mixer. Precondition resin, hardener and aggregate to 18°-27°C for 48 hrs, before mixing. Thoroughly mix hardener with resin first before mixing in aggregate. Where a very flowable mix is required, the aggregate content may be reduced accordingly. However, in load bearing areas a maximum reduction to 3-1/2 bags is recommended. Please contact ITW Polymers & Fluids Technical Department if less than 3-1/2 bags are being considered.

Chockfast® Red is quick curing, relative to cement grouts, but the cure is thermally gentle. This allows thick pours to be made without causing the stress cracks often associated with a hot-curing epoxy grout. Chockfast® Red may be used in thicknesses greater than 30mm, however, individual pours should generally not exceed 460mm in thickness and 2.2m in length. When grouting highly critically aligned machinery, which is coupled to another machine, it is advisable to limit the final levelling pour.

Product specification sheet

product sheet pdfChocfast Red product specification sheet opens in a new window

Manufacturer

Epirez

Epirez logo
Epirez was founded in 1955 and the first product formulations pioneered the Australian development of epoxy based adhesives and coatings for use on concrete. Since then, Epirez has continued to break new ground in epoxy technology for architects, engineers, consultants,
  • Australasian Corrosion Association
  • Association for Materials Protection and Performance
  • Illawarra Innovative Industry Network
  • NACE International
  • The Society of Protective Coatings