Sikadur 30

Thixotropic self-priming epoxy adhesive for structural strengthening using CFRP laminates and
steel plate bonding

Sikadur®-30 is a thixotropic, structural 2-component
adhesive, based on a combination of epoxy resins and
special filler, designed for use at normal temperatures
between +8 °C and +35 °C.

Uses

Sikadur®-30 may only be used by experienced professionals. Adhesive for bonding structural reinforcement, particularly in structural strengthening works. Especially for the following uses:

• Sika® CarboDur® Plates to concrete, brickwork, and
  timber (for details, see the Sika® CarboDur® Product
  Data Sheet, the “Method Statement for Sika® CarboDur® Externally Bonded Reinforcement” Ref: 850
  41 05 and the “Method Statement for Sika® CarboDur® Near Surface Mounted Reinforcement” Ref:
  850 41 07)
• Steel plates to concrete (for details, see the relevant
  Sika Technical Information

Characteristics / Advantages

Sikadur®-30 has the following advantages:

• Very low VOC
• Easy to mix and apply
• No primer needed. Self-priming adhesive saves time on installation
• High creep resistance under permanent load
• Very good adhesion to concrete, masonry, stonework, steel, cast iron, aluminium, timber and Sika®
  CarboDur® Plates
• Hardening is not affected by high humidity
• High-strength adhesive
• Thixotropic: non-sag in vertical and overhead applications
• Hardens without shrinkage
• Different coloured components (for mixing control)
• High initial and ultimate mechanical resistance
• High abrasion and shock resistance
• Impermeable to liquids and water vapour

Product specification sheet

Manufacturer

Sika Australia

As a specialty chemical supplier for the building and construction industry, Sika Australia prides itself on being technically driven and project-motivated. Product line features high-quality concrete admixtures, specialty mortars, sealants and adhesives, damping and reinforcing materials, structural strengthening systems, industrial