HyGrout E200

HY-GROUT E200 is a 100% solids, high-performance epoxy grout designed for use in situations where high early mechanical strength development is required and long-term non-shrink performance and effective transfer of static and dynamic loads are important. It is ideal in low-temperature environments.

Use

• Heavy machinery with large base plates in industrial plants
• Equipment subject to constant dynamic loads, such as motors and turbines
• As a high-strength repair mortar for concrete structures
• As a replacement for cement grouts in locations exposed to chemical damage
• Rail mountings, plinths and footings
• End capping of post-tension trunchions

HY-GROUT E200 is ideal for use in a wide variety of industries such
as marine, power generation, mining, chemical plants, structural
engineering, transportation, printing and general manufacturing.

Features and Benefits

• Rapid development of strength, 65 MPa in 8 hours
• Very high mechanical strength – compressive, tensile and flexural
• Excellent vibration and dynamic load tolerance
• Excellent flow and high bond strength, ensuring even load
  distribution
• Resistant to a wide range of chemicals, acids, caustic, and
  hydrocarbons
• Moisture tolerant, can be applied to damp concrete
• Suited to application in low temperatures down to 5°C

Physical Performance

Epoxy grouts have much higher physical performance capabilities
than cement grouts, with 3 times the compressive strength and up
to 10 times the tensile strength. They are also more impact-resistant
and withstand cracking due to mechanical vibrations. Individual
epoxy grouts vary depending on whether they are formulated for
high or low temperature use, minimal cost or specific flow and
creep properties.
The placement depth of an epoxy grout is dependent on the heat
released during cure and the resultant shrinkage and cracking
forces that occur. HYCHEM E200 is a fast-curing grout releasing
considerable heat.
E200 can be modified with epoxy grade kiln-dried quartz.
Standard fill ratio is 2 x 20kg W6 and 1 x 20kg 1mm. This can be
reduced to increase the fluidity of the grout, bearing in mind there
would be a reflective increase in heat generation within the grout.

For more Epoxy grouts available, click here.

Product specification sheet

Manufacturer

Hychem International

HYCHEM International manufacturers and markets a range of products aimed at the repair and protection of concrete structures. To complete the product offer Hychem manufactures a range of epoxy grouts designed to fix and support dynamic machinery to concrete foundations.