Epoxy Mortar FIS EM PLUS

An industry leading epoxy injection mortar for rebar connections and
cracked concrete.

ADVANTAGES

The optimised formulation of the epoxy resin mortar FIS EM Plus leads to improved load values in cracked and non-cracked concrete.
The mortar can be used for rebar connections from a diameter of 8 to 40 mm.
With the threaded rod FIS A, the loads to be applied can be designed variably by selecting the anchorage depth.
Temporary and detachable fixing points are possible with the internal threaded anchor RG M I.
For practical use on the building site, FIS EM Plus can be processed at low temperatures down to 0 °C (outside of the assessment, even down to -5 °C).
The mortar is approved for diamond-drilled and water-filled drill holes as
well as seismic applications of performance categories C1, C2 and thus
offers safety under extreme conditions.

The epoxy mortar FIS EM Plus, combined with the FIS A threaded rod, is suitable for pre-positioned and push-through installation and with the internal threaded anchor RG M I for pre-positioned.
Resin and hardener are stored in two
separate chambers and are not mixed
and activated until extrusion through
the injection capsule in the static
mixer.
The mortar is injected bubble-free
from the drill hole base.
The mortar bonds the entire surface of
the anchor with the drill hole wall and
seals off the drill hole.
The anchor is set manually by lightly
rotating it until it reaches the drill hole
base.
During push-through installation, the
annular gap between the anchor
rod and attachment are filled with FIS EM Plus.