Arditex NA

Low odour – User friendly

Superior flow – Self smoothing

Rapid hardening – Install many floor coverings from 4 hours

Versatile – Timber and damp concrete substrates

DESCRIPTION

ARDITEX NA Self Levelling and Smoothing Compound is a two part latex liquid and cementitious powder with excellent adhesion properties.

Engineered with high water resistance ARDITEX NA can be installed under flexible waterproof membranes.

With enhanced flexibility ARDITEX NA is particularly suitable for installation over timber floors.

INSTALLATION OVER ADHESIVE

RESIDUE ARDITEX NA may be used in applications over sound, well bonded and moisture insoluble adhesive residue.

As a guideline, residue should not exceed 33% per square metre, no individual agglomeration of residue to exceed 50x50mm in area and shall be less than 1mm in thickness. Remove all poorly bonded residue and always subsequently thoroughly vacuum. Always confirm installation on site by conducting a representative trial area. After priming apply ARDITEX NA in these cases at least 3mm thick and no greater than 6mm in thickness.

CAUTION: Installation best practice is to grind all floors clean of adhesive and other residue. Installing over adhesive residue or other contaminants will increase the risk of application failure to the contractor.

ARDEX Australia P/L accepts no liability where ARDITEX NA is installed over excessive, water soluble or poorly adhered residue.

Product specification sheet

Manufacturer

Ardex

ARDEX develops, manufactures and markets high-quality specialist construction materials including those for the floor levelling and repair industries.