350 Hammerfinish Enamel

350 Hammerfinish is rapid drying alkyd spray enamel for decoration and protection of metal and timber substrates. This product is designed to cover surface imperfections such as grinding marks, weld stops, scratches and uneven surfaces

350 Hammerfinish is rapid drying alkyd spray enamel for decoration and protection of metal and timber substrates. This product is designed to cover surface imperfections such as grinding marks, weld stops, scratches and uneven surfaces

350 Hammerfinish has the following features:

• Excellent hold up on vertical surfaces.
• One coat finish and rapid dry.
• Various patterns achieved by altering spraying technique and viscosity.
• Excellent adhesion to ferrous surfaces.
• Standard colour range and custom colour matching available.

Typical areas of application:

• Machinery, metal furniture and tool boxes.
• Cabinets and lockers.
• Bobcats, lawn mowers, electrical motors and pumps.
• Ornamental metal work.

Surface Preparation:

• When overcoating; Aged paint coatings should be tested for adhesion using Crosshatch or Crosscut methods. If aged paint coating lifts remove it.
• Remove all rust, oxides, millscale and lose paint from metal surface.
• Round off all sharp edges, welding joints and weld spatter.
• All surfaces to be painted should be clean and free from dust, dirt, oil, grease and moisture.
• All abrasive blast clean ferrous surfaces should be coated within 4 hours to avoid flash rusting.
• Do not apply at temperatures below 5’ Celsius. Do not apply at relative humidity above 85%, or when the substrate surface is less than 3’ Celsius above dewpoint.

Equipment Application: (Conventional or Airless Spray Recommended). As a Guide Use:

• Brush or Roller – Not Suitable.
• Conventional Spray – 1.3 -2.0mm tip (or equivalent). Pressure pot set at 55 – 100kpa (8 – 15psi) and maintain gun air pressure 275 – 380kpa (40 -55psi).
• Airless Spray – Use heavy-duty airless spray with 10 -15 “(0.25 – 0.38mm) plus tip and pump ratio 30:1.

Product specification sheet

Manufacturer

Lacnam

Lacnam is a leading industrial paint supplier to wholesalers, manufacturers, government and private sector clients. Lacnam Paints Australia is a successful paint manufacturer that develops and produces specialized liquid paint coatings for industrial and heavy duty application.